Aluminium

Product Details:

Product Details:
7075 Aluminum Plate and SheetAlloy 7075 has been the standard workhorse 7XXX series alloy within the aerospace industry. Zinc is the primary alloying element in 7075 and was the first successful Al-Zn-Mg-Cu high strength alloy using the beneficial effects of the alloying addition of chromium to develop good stress-corrosion cracking resistance in sheet products. 7075 Aluminum has a lower level of corrosion resistance and has no weldability, i.e. it is not weldable. This particular kind of alloy is known for its level of fatigue strength, however, it is only average when it comes to machinability.7075 Aluminum Applications7075 Aluminum is one of the highest strength aluminum alloys made for the industrial and consumer markets. Although other 7XXX alloys have since been developed, Alloy 7075 remains the baseline with a good balance of properties required for aerospace applications. In terms of application, it is perfect for parts that have areas that are highly stressed. These specific strength properties are ideal for the construction of military grade rifles, plastic industry molds, bicycle part, and equipment as well as aircraft structures.7075 T651 Aluminum7075 T651 Aluminum is also available and is best suited for aviation and aerospace applications. Ultimately, if strength is what you need, this particular tempered alloy also has higher tensile strength.Sizes of 7075 Aluminum AvailableWe stock 7075 T651 in thickness from .125" to 8.0" thick, x 48.5 or 60.5 wide x 144.5" long, we do carry some thicknesses of 7050 T7451 and would entertain quotes for any thickness you have. Our plate meets QQA 250/12, ASTM B209 and AMS 4045 specifications. Please inquire for compliance with any specialty aircraft or industry-specific specifications.ASTM: ASTM B209-10 (Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate)Alloy: 7075-T651Characteristics: Lightweight, semi-smooth surface with a dull mill finish.Workability: Excellent candidate for most processing techniques. One of the highest strength to weight ratio, heat treatable alloys available. Good corrosion resistance.Applications: Commonly machined to end-user specifications. Use where high strength is required.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Defence Standard 02-833 is primarily used in the marine and offshore industries for fasteners, pump and valve components, pipe fittings, deck fittings and heat exchangers due to its high strength and toughness (even at cryogenic temperatures), combined with an excellent corrosion resistance in seawater.

Additional Information:

• Production Capacity: Depends on requirement
• Delivery Time: 2 Weeks
• Packaging Details: Export Worthy

Product Details:

Product Details:
6061-T6 Aluminum Rectangle Tube is frequently found in aircraft construction. Alloy 6061-T6 has a high strength-to-weight ratio.

We stock a large selection of aluminum rectangular tubing, including hard to find large press sizes. We feature common alloys such as 6082, 6061 and 6063. Custom sizes, lengths, alloys and finishes are available.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Aluminium Checkered Plate. Aluminium checker plate is widely used in decorative, shipbuilding and architectural applications. Having good forming, drilling and welding ability, aluminum diamond plate is easy to fabricate and its raiseddiamond lug pattern provides good slip resistance

Product Details:

Product Details:
Within a short period of time, we have gained a prominent position in the market, by offering a wide assortment of Aluminium Rectangular Tube. Ranges of our products are widely acclaimed for optimum quality, perfect finishing and varied thickness. Our Pipes are at par with the industrial standards of quality because we make use of high quality raw material in the production process. One can avail these products from us at competitive prices and with a time bound delivery assurance. Aluminum / Aluminium alloys have high ductility and corrosion resistance. Aluminum / Aluminium 3003 alloy has moderate strength and good corrosion resistance. The strength of this alloy can be increased by cold working. Features:

• Well finished
• Light weight
• Durable

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Product Details:
We supplies a vast range of Aluminum Pipe 6082 which includes aluminium round tube, aluminium square tube, aluminium rectangular tube, aluminium flat bar, aluminium channel, aluminium tee section, aluminium cope, aluminium gutter section, aluminium wallboard sections, aluminium round bar, alumnium square bar, anodised aluminium, aluminium sheet, aluminium five bat treadplate, aluminium plate and aluminium easyfix tubes.

Characteristics and Uses of Aluminium Pipe:

• Aluminium pipe and aluminium tube are mostly used for various industrial or construction applications, but homeowners and auto manufacturers are also fast appreciating the use of aluminium pipe and aluminium tube, and they have adapted it for common household applications. Using aluminium tube or pipe can save you a lot of money as it is a lighter and cheaper alternative to steel or iron pipes. Aluminium tubing is available in a range of diameters from 2-inch to 12-inch; and they are available with their ends threaded for use with couplers. Here are some common applications for aluminium pipe and tube:
• You can apply aluminium tubing to borders around the garden beds. The material is also light enough to be used for creating fence for tomatoes, vine, and other climbing plants. The length of aluminium pipe can be connected as well as angled by binding cut tennis balls at the end. This keeps the structure solid, but lasts for the season.
• The CB radio and Ham radio fans use aluminium piping to form the structure to carry antennas from different residential roofs. The extended antennas improve the signal received by the device, and the pipes also help to endure the winds generated in various parts of the country.
• The interior furnishing industry also utilizes aluminium pipes. Items such as canopy beds and bedside tables are usually made from wrought iron. The aluminium tubes are a lightweight alternative which adds a contemporary look to the room. There are many fasteners presented for threaded lengths of tubing.
• Aluminium tubes are used extensively in diverse industries such as the food processing, aerospace, medical equipment, mining, computer, and automotive industries. The metal pipes are also used in the carrying fluids and gases in various pneumatic and hydraulic applications.
• Aluminum Pipe Email Friend
• Aluminum Pipe is a extruded product that is widely used for all types of fabrication projects where lightweight and corrosion resistance is a primary concern. Aluminum Pipe is available in both 6061-T6 and 6063-T6, with the 6063 being more bendable and has a brighter finish than the 6061.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Product Details:
7075 Aluminum Plate and SheetAlloy 7075 has been the standard workhorse 7XXX series alloy within the aerospace industry. Zinc is the primary alloying element in 7075 and was the first successful Al-Zn-Mg-Cu high strength alloy using the beneficial effects of the alloying addition of chromium to develop good stress-corrosion cracking resistance in sheet products. 7075 Aluminum has a lower level of corrosion resistance and has no weldability, i.e. it is not weldable. This particular kind of alloy is known for its level of fatigue strength, however, it is only average when it comes to machinability.7075 Aluminum Applications7075 Aluminum is one of the highest strength aluminum alloys made for the industrial and consumer markets. Although other 7XXX alloys have since been developed, Alloy 7075 remains the baseline with a good balance of properties required for aerospace applications. In terms of application, it is perfect for parts that have areas that are highly stressed. These specific strength properties are ideal for the construction of military grade rifles, plastic industry molds, bicycle part, and equipment as well as aircraft structures.7075 T651 Aluminum7075 T651 Aluminum is also available and is best suited for aviation and aerospace applications. Ultimately, if strength is what you need, this particular tempered alloy also has higher tensile strength.Sizes of 7075 Aluminum AvailableWe stock 7075 T651 in thickness from .125" to 8.0" thick, x 48.5 or 60.5 wide x 144.5" long, we do carry some thicknesses of 7050 T7451 and would entertain quotes for any thickness you have. Our plate meets QQA 250/12, ASTM B209 and AMS 4045 specifications. Please inquire for compliance with any specialty aircraft or industry-specific specifications.ASTM: ASTM B209-10 (Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate)Alloy: 7075-T651Characteristics: Lightweight, semi-smooth surface with a dull mill finish.Workability: Excellent candidate for most processing techniques. One of the highest strength to weight ratio, heat treatable alloys available. Good corrosion resistance.Applications: Commonly machined to end-user specifications. Use where high strength is required.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Product Details:
The following specifications cover Aluminum 6061:

• 6061 Aluminum is, by most any measure, the most commonly used aluminum alloy. It is specified in most any application due to its strength, heat treat ability, comparatively easy machining, and weld ability.
• The main alloy ingredients of 6061 aluminum are magnesium and silicon. 6061 aluminum is heat treated and corrosion resistant. It is excellent for resisting moisture and is strong for it''s light weight. It is easy to drill, machine and saw.

Chemistry Data : 

• Aluminum : Balance
• Chromium : 0.04 - 0.35
• Copper : 0.15 - 0.4
• Iron : 0 - 0.7
• Magnesium : 0.8 - 1.2
• Manganese : 0.15 max
• Other : 0.15 max
• Remainder Each : 0.05 max
• Silicon : 0.4 - 0.8
• Titanium : 0.15 max
• Zinc : 0.25 max

Principal Design Features:

• Probably the most commonly available, heat treatable aluminum alloy.

Applications:

• Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, and in pipelines.

Machinability:

• Machinability in the harder T 4 and T6 tempers is good. It is notably less easy to machine in the annealed temper.

Forming:

• Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods.

Welding:

• The alloy has very good welding characteristics and may be welded by all of the common welding techniques. Gas tungsten arc welding is generally used for thin sections (less than 0.032") and gas metal arc welding is used for heavier sections. Use alloy 4043 filler wire for best results, although a decrease in T 6 properties will result.

Heat Treatment:

• Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling.

Forging:

• The alloy is capable of being hot forged at temperatures in the range of 900 F to 750 F.

Hot Working:

• Hot working may be done in the temperature range of 700 F to 500 F.

Cold Working:

• Cold working in the O temper condition is readily performed. The alloy is notably less easy to cold form in the T 4 and T 6 tempers.

Annealing:

• Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool.

Aging:

• The aging precipitation heat treatment is done at 350 F for 8 hours followed by air cooling. This produces the T6 temper.

Tempering:

• Not applicable.

Hardening:

• See "Aging".

Other Physical Props:

• Electrical conductivity 40% of copper.

Physical and Mechanical Properties:Ultimate Tensile Strength, psi: 45,000Yield Strength, psi: 40,000Brinell Hardness: 95Rockwell Hardness: B60

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Product Details:
Aluminum Square Bar (Rod) is available in various alloys offering a range of weldability, corrosion resistance, and machinability. High strength Aluminum Square bar, such as alloy 7075, can be used in aerospace applications, and for high strength to weight rations, Aluminum Alloy 2024-T351 Square Bar is commonly used. Aluminium Rod and Bar A medium strength alloy with good corrosion resistance. Standards Rod: BS1474 HE30 TF (1987), BSEN 754-5 6082 T6We Maharashtra Metal have ready stock of Aluminum Square Bars. We are one of the leading stockists, Suppliers, and Exporters of Aluminum Square Bars. Aluminum Square Bars available ready stock in Square, Rectangle And Round Shape. In Different Grades Such AS HE 9, HE 15, HE 30, 6061, 6063, 2014, 2024, 7075, 5083 In Various Sizes
Other Information:
 

• Delivery Time: Ready Stock
• Packaging Details: Export Worthy

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Product Details:
Aluminum Bus Bars for power distribution give an economic advantage compared to copper bars due to the lower cost of aluminum and to a significant difference in the weight / volume.In fact aluminum bars weigh up to 70% less than copper bars, compared with a reduction in electrical capacity of only about 30%.The use of aluminum bars for carrying electrical current is therefore recommended in switchboards, distribution equipment and systems where there are no space problems, or where weight reduction is critical. Aluminium solid bars with rounded corners are available with a Thickness of 10 mm and length of about 4 meters.

Ampacity table for Aluminium bars based on the T temperature increase as per standard DIN 43670
Reference room temperature 35°C

Rectangular shapes are the all-purpose rigid conductor for switchgear, control apparatus and busways. Heat dissipation can be improved through the use of a multiple bus bar arrangement, resulting in a larger surface area. The use of rectangular bus bar makes it easy to create joints and taps by bolting or welding, and also simplifies the creation of 90-degree bends and off-sets. Varying the size or number of bars in a parallel arrangement can control the capacity of a bus bar conductor using direct current, as well as alternating current up to certain limits. High-amperage alternating current can be handled with special arrangements of laminations.

We are leading manufacturers of Aluminum Busbar (flat bar) electrical grade tubular & flat bus bars that are known for their excellent electrical conductivity properties & very good bending properties . These cater to the panels, switchgear, earthing & other electrical bus bar applications & related industries and are available in different sizes, thickness and widths as per the requirements of the clients. 

Features:

• Durability
• High strength
• Dimensionally stable

Our design capabilities include complete machining, forming, brazing & welding processes plus plating & coating services. We produce innovative designs for high performing aluminum bus bars that weigh less, resulting in reduced labor cost due for installation and support.

We enables companies to fulfill their project requirements with a wide selection of excellent quality aluminum bus bar products. Aluminum is critical to a diverse range of applications in industries ranging from transportation, electronics, and construction, to packaging, household items, and recreational products.Our aluminum bar products are available in various sizes, and we are also able to accommodate custom orders. Simply send us your component specifications, and we will be glad to help you bring your design to life.Quality is of utmost priority. All our locations carry ISO/9001 certification, and all employees undergo ongoing training to meet the exacting needs of our customers. We are also committed to helping customers meet their deadlines. With our just in time delivery system, we help customers maintain timely projects.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

7075 aluminium alloy is an aluminium alloy, with zinc as the primary alloying element. It is strong, with a strength comparable to many steels, and has good fatigue strength and average machinability. It has lower resistance to corrosion than many other aluminium alloys, but has significantly better corrosion resistance than the 2000 alloys. Its relatively high cost limits its use.

7075 aluminium alloy's composition roughly includes 5.6–6.1% zinc, 2.1–2.5% magnesium, 1.2–1.6% copper, and less than a half percent of silicon, iron, manganese, titanium, chromium, and other metals. It is produced in many tempers, some of which are 7075-0, 7075-T6, 7075-T651.

Product Details:

2014 aluminium alloy (aluminum) is an aluminium-based alloy often used in the aerospace industry.^[1]

It is easily machined in certain tempers, and among the strongest available aluminium alloys, as well as having high hardness. However, it is difficult to weld, as it is subject to cracking.^[2]

2014 is the second most popular of the 2000-series aluminum alloys, after 2024 aluminum alloy. It is commonly extruded and forged. The corrosion resistance of this alloy is particularly poor. To combat this, it is often clad with pure aluminum. If unclad 2014 aluminum is to be exposed to the elements, it should be painted as a corrosion protection measure.^[3]

Product Details:

Aluminum strip refers to strip shape product which manufactured with aluminumas the main raw material, and mix other alloy elements. ... The common aluminummodel are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011 and so forth. The commonly used temper are O and H states. O is soft, and H is hard

Product Details:

Aluminium Alloy Plates 5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades.

Product Details:

We take privilege to introduce ourselves as a prime suppliers various quality of Stainless Steel and Carbon Steel Pipe Fittings Flanges Fasteners nickel alloys and special grades Round bars suitable for various applications

Product Details:

5083 - ''0'' - H111 Sheet and Plate

Aluminium 5083 is known for exceptional performance in extreme environments. 5083 is highly resistant to attack by both seawater and industrial chemical environments.
Alloy 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.

Applications
Alloy 5083 is typically used in:
~ Shipbuilding
~ Rail cars
~ Vehicle bodies
~ Tip truck bodies
~ Mine skips and cages
~ Pressure vessels

Mechanical Properties shown are for 0/H111 temper

 Chemical CompositionSpec: BS EN 573-3:2009Alloy 5083 Properties Spec: BS EN 485-2:2008Sheet - 0.2 - 6.3mm Thick Spec: BS EN 485-2:2008Plate - 6.3mm to 80mm Spec: BS EN 485-2:2008Plate - 80mm to 120mm Alloy Designations

Alloy 5083 corresponds to the following standard designations and specifications but may not be a direct equivalent: :

GM41

A95083

AlMG4.5Mn

Al Mg4.5 Mn0.7

 

 

 Temper Types

The most common tempers for 5083 aluminium are:

• O - Soft
• H111 - Some work hardening imparted by shaping processes but less than required for H11 temper
• H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard

 Supplied Forms

 

• Plate
• Sheet

 Weldability

When welding 5083 to itself or another alloy from the same sub-group, the recommended filler metal is 5183. Other suitable fillers are 5356 and 5556.

 

Weldability – Gas: Average

Weldability – Arc: Excellent

Weldability – Resistance: Excellent

Brazability: Poor

Solderability: Poor

Product Details:

Product Details:
6061-T6 Aluminum Rectangle Tube is frequently found in aircraft construction. Alloy 6061-T6 has a high strength-to-weight ratio.

We stock a large selection of aluminum rectangular tubing, including hard to find large press sizes. We feature common alloys such as 6082, 6061 and 6063. Custom sizes, lengths, alloys and finishes are available.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Product Details:
We manufacture and supply Aluminum Flat Bars section in various grades and dimensions, as per the requirements of our valued clients. Our wide range of bars is made from superior quality raw material, as per the industry standards. These aluminum bars undergo stringent checking to ensure their flawless quality and durability.

Features:

• Longer usage life
• Optimum strength
• Dimensional accuracy
• Resistance against corrosion

Other Information:
 

• Pay Mode Terms: T/T (Bank Transfer)

Attributes:
 

• High quality
• Highly appreciated by the customers
• Easy availability
• Durable
• 100% efficiency

Used In:
 

• Aircraft
• Automobiles
• Construction
• Transport
• Flashlights
• Jigs

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper,magnesium, manganese, silicon, tin and zinc.