Stainless Steel Angles & Channels

Product Details:

We have a wide variety of Dairy Pipe Fittings that are offered in several finishes like dairy polished, electro polished and 320 grits. Widely used in different industries, these dairy pipe fittings are available in varied types like bend, tee, cross, reducer, union, clamp with ferrule, clamp (pipe holding) with coupling and nipple & base plate.Range1/2" O.D. - 10" O.D.

GradeASTM A403 WP304, 304L, 304H, 310, 316, 316L, 321, 321H, 347

StandardDIN / TRICLOVER / IDF / SMS / BSP / NPT

User IndustriesDairy, Breweries, Mineral water, Cosmetics, Chemicals, Distilleries, Food, Soft Drinks, Pharmaceuticals, Process Control and Allied Industries.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Cash

Product Details:

Stainless steel all thread rod is common in the maketplace and is sold under several different ASTM specifications. The two most common forms of stainless all thread rod are bought and sold simply as AISI Type 304 or Type 316 stainless steel. However, stainless steel all thread rod is often specified under a variety of ASTM specifications including A193, A320, and F593. The type of stainless steel desired for the project will be specified as a grade within the A193 and A320 specifications or as a alloy group and condition within the F593 specification.

Product Details:

Valves can be categorized into the following basic types

Ball valve, for on/off control without pressure drop, and ideal for quick shut-off, since a 90 Degree turn offers complete shut-off angle, compared to multiple turns required on most manual valves.
Butterfly valve, for flow regulation in large pipe diameters.
Clapper valve, Used in appliances like the Siamese fire appliance to allow only 1 hose to connected instead of two (the clapper valve blocks the other side from leaking out.
Check valveor non-return valve, allows the fluid to pass in one direction only.
Choke valve, a valve that raises or lowers a solid cylinder which is placed around or inside another cylinder which has holes or slots. Used for high pressure drops found in oil and gas wellheads.
Diaphragm valve, which controls flow by a movement of a diaphragm. Upstream pressure, downstream pressure, or an external source (e.g., pneumatic, hydraulic, etc.) can be used to change the position of the diaphragm.
Gate valve, mainly for on/off control, with low pressure drop.
Globe valve, good for regulating flow.
Knife valve, similar to a gate valve, but usually more compact. Often used for slurries or powders on/off control.
Needle valvefor accurate flow control.
Pinch valve, for slurry flow regulation and control.
Plug valve, slim valve for on/off control but with some pressure drop.
Poppet valve, commonly used in piston engines to regulate the fuel mixture intake and exhaust
Spool valve, for hydraulic control
Thermal expansion valve, used in refrigeration and air conditioning systems.
Aspin valve a cone-shaped metal part fitted to the cylinder head of an engine
Blast valve prevents rapid overpressuring in afallout shelteror abunker
Boston valve three-part two-portcheck valveused on inflatable boats, air mattresses, airbeds etc.; available in two sizes, normal and small
Cock colloquial term for a small valve or astopcock
Demand valve on adiving regulator
Flow control valve an application which maintains a variable flow rate through the valve
Heimlich valve a specific one-way valve used on the end ofchest drain tubesto treat apneumothorax
Foot valve a check valve on the foot of a suction line to prevent backflow
Four-way valve was used to control the flow of steam to the cylinder of early double-acting steam engines
Freeze seal/Freeze plug in which freezing and melting the fluid creates and removes a plug of frozen material acting as the valve
Leaf valve one-way valve consisting of a diagonal obstruction with an opening covered by a hinged flap
Pilot valve regulates flow or pressure to other valves
Pinch valve, "beach ball valve" simple, single-part two-portcheck valvemade from soft plastic and molded on to inflatable units such as beach balls, air mattresses, water wings; can be inflated by pump or by mouth.
Plunger valve To regulate flow while lowering the pressure
Poppet valveandsleeve valve commonly used inpiston enginesto regulate the fuel mixture intake andexhaust
Reed valve consists of two or more flexible materials pressed together along much of their length, but with the influx area open to allow one-way flow, much like a heart valve
Rotary valvesandpiston valves parts of brass instruments used to change their pitch
Saddle valve where allowed, is used to tap a pipe for a low-flow need
Safety valveorrelief valve operates automatically at a set differential pressure to correct a potentially dangerous situation, typically over-pressure
Vacuum breaker valve prevents the back-siphonageof contaminated water into pressurized drinkable water supplies

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Cash

Product Details:

Rajkrupa Metal Industries Products supplies stainless channels in 304/304L and 316/316L. Larger channels in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused channels can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless channels can be supplied with a polished finish. See below for information specific to channels. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Stainless steel angle is a hot rolled angle shape available with either equal or unequal leg length. Inside radius corner add strength to the shape. Stainless angle is well suited for structural applications that require strength and excellent corrosion resistance. Stainless steel angle also has a dull gray, mill finish and is used in all types of fabrication projects exposed to corrosive environments, such as acidic, chemical, fresh and salt water environments.

Rajkrupa metal industries offers stainless steel angle in 304 / 304L and 316 / 316L alloys. Request a quote today

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Stainless steel angle is a hot rolled angle shape available with either equal or unequal leg length. Inside radius corner add strength to the shape. Stainless angle is well suited for structural applications that require strength and excellent corrosion resistance. Stainless steel angle also has a dull gray, mill finish and is used in all types of fabrication projects exposed to corrosive environments, such as acidic, chemical, fresh and salt water environments.

Rajkrupa Metal Industries offers stainless steel angle in 304 / 304L and 316 / 316L alloys. Request a quote today!

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless channels in 304/304L and 316/316L. Larger channels in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused channels can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless channels can be supplied with a polished finish. See below for information specific to channels. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Stainless steel angle is a hot rolled angle shape available with either equal or unequal leg length. Inside radius corner add strength to the shape. Stainless angle is well suited for structural applications that require strength and excellent corrosion resistance. Stainless steel angle also has a dull gray, mill finish and is used in all types of fabrication projects exposed to corrosive environments, such as acidic, chemical, fresh and salt water environments.

Rajkrupa Metal Industries offers stainless steel angle in 202 alloys. Request a quote today!.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless channels in 310/310S. Larger channels in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused channels can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless channels can be supplied with a polished finish. See below for information specific to channels. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless angles in 310/310S. Larger angles in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused angles can also be supplied in Duplex 2205 and lean Duplex 2101.

All angles can be cut to size. Stainless angles can be supplied with a polished finish. See below for information specific to angles. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless channels in 321/321H. Larger channels in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused channels can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless channels can be supplied with a polished finish. See below for information specific to channels. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless angles in 321/321H. Larger angles in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused angles can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless angles can be supplied with a polished finish. See below for information specific to angles. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless channels in 904L. Larger channels in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused channels can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless channels can be supplied with a polished finish. See below for information specific to channels. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Rajkrupa Metal Industries Products supplies stainless channels in 317L. Larger channels in excess of 24″ can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused channels can also be supplied in Duplex 2205 and lean Duplex 2101.

All channels can be cut to size. Stainless channels can be supplied with a polished finish. See below for information specific to channels. Also, see our Structural Products page for structural overview info, including manufacturing techniques.

Additional Information:

• Delivery Time: Depends upon size

Product Details:

Our organization is dedicatedly engaged in providing customers with a wide range of Ferrule Fittings. These products are manufactured by the professionals to highest quality standards and can be availed by them in a broad range of size, material and configurations as per their needs.

Engineered under precise manufacturing conditions, Our wide assortment of Ferrule Fitting is used in diverse industry vertexes. We are instrumental in fabricating premium quality Ferrule Fitting which is offered in standard and customized specifications. Our stainless steel Ferrule Fitting as well as Ferrule Pipe Fittings provides leak proof applications and maintenance free components. being one of the leading exporters of these Fittings, We offer our Customers These products according to their specifications.

These pipe fittings are developed with the use of premium grade stainless steel and MS steel. Moreover, manufactured in accordance to the clients'' given specifications, these fittings are applicable in electrical, pharmaceutical, automobile and other allied industries.

FEATURESResistance to corrosion
Longer functional life
High tolerance capability

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Cash